Photoelectric Beam Sensor TAKEX PR-30BE
- The newly developed PR-30BE, adopting Time of Flight technology, can protect 30m (outdoor) with one side wiring.
Feature
- Easy Installation: As wiring is needed only on the sensor unit (one side), you can use it in places where it is difficult to wire on both sides. One-side wiring reduces time and cost of installation sighificantly.
- More Reliable Protection (Time Of Flight): Adopting ToF technology makes the detection more secure regardless of environment and material/color of the object, by avoiding lost alarms caused by wrap-around of the reflected beam near the center of the detection area.
- For Indoor And Outdoor Applications: This sensor can be used both indoor and outdoor. Maximum detection distance can be 40m for indoor applications (hood of reflector is detachable).
- Easy Beam Alignment:Beam alignment can be adjusted on the sensor unit side only by utilizing dual ring viewfinder, monitor output and new sound check function. (Intermittent and continuous tone).
- Flexible Protection Area Setting: The lens is adjustable horizontally (+/-90 degrees) and vertically (+/-5 degrees) by thumbscrew without screw driver, allowing the unit to work in all directions.
- Response Time Adjustment: Response time can be adjusted by DIP switch with 4 steps (0.05 / 0.1 / 0.25/0.5 sec.) to reduce false alarms depending on the location.
- Minimum Operational Distance: Even narrow zones can be protected with minimum operational detection distance of 0.5m, widening the area of applications.
- Easy Operation Check: Alarm LED (red), attenuation LED, and sound check are equipped for quick and easy operation check. (After closing the cover, the sensor will enter walk test mode for a period of 5 minutes. During this time, a sounder will activate upon detection. The walk test mode will automatically terminate after 5 minutes.).
- Option Accessories: L fitting (BL-11) is available as option to mount the reflector for protection along the wall.
Specification
| Detection system |
Near infrared beam interruption system (reflective) |
| Protection distance |
Outdoor 1.7 to 100' (0.5 to 30m)
Indoor 1.7 to 135' (0.5to 40m) |
| Supply voltage |
10.5V to 30V DC (Non-polarity)
(Class 2 powered device) |
| Current consumption |
200mA or less
160 mA or less (12V DC)
80 mA or less (24V DC) |
| Alarm output |
Dry contact relay Dry contact relay N.O. /N.C.
Contact capacity : 30V (AC/DC) 0.25A or less
Relay operation : Interruption time (minimum 2 secs) |
| Environmental output |
Dry contact relay Dry contact relay N.O. /N.C.
Contact capacity : 30V (AC/DC) 0.25A or less |
| Tamper output |
Dry contact relay 1b (N/C)
Action : Activated when cover is detached.
Contact capacity : 30V (AC/DC) 0.25A or less |
| Response time |
0.05/0.1/0.25/0.5sec. |
| Alarm LED |
Red LED
ON : when an alarm is initiated |
| Sensitivity attenuation/Environment LED |
Red LED
When front cover detached (when alignment) :
Beam is attenuated.
When front cover attached : Weather condition
gets worse. (Synchronize with Env.output) |
| Functions |
- Monitor output
- Response time adjustment |
| Ambient temperature |
-25℃ to + 60℃ (-13°F to +140°F) |
| Mounting position |
Outdoor, Indoor |
| Wiring |
Terminals |
| Weight |
Sensor: 13oz (370g)
Reflector: 6.7oz (190g) |
| Appearance |
Sensor: Resin (wine red)
Reflector: Resin (clear/black) |
- Bảo hành: 12 tháng.
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
