Tìm theo hãng

Seco-Larm E-9643-4B190Q Long-Range Barrier Sensors for Indoor/Outdoor Access Control

Tình trạng: Còn hàng
Lượt xem: 167
(0 đánh giá)
Thông số sản phẩm
For indoor or outdoor perimeter securityHeater for use in cold weather operationHeater activates at 41ºF (5ºC)Terminal block wiringForm C relay output
Bảo hành: 12 Tháng
Giá bán: 350.000đ
Hot
Yên Tâm Mua Sắm
• Đội ngũ kỹ thuật tư vấn chuyên sâu • Thanh toán thuận tiện • Sản phẩm 100% chính hãng • Bảo hành 1 đổi 1 tại nơi sử dụng • Giá cạnh tranh nhất thị trường
Liên Hệ Với Kinh Doanh Online

Đánh giá sản phẩm Seco-Larm E-9643-4B190Q Long-Range Barrier Sensors for Indoor/Outdoor Access Control

ENFORCER Long-Range Barrier Sensors are ideal for protecting indoor or outdoor areas separated by long distances. They feature reliable photobeam technology with a choice of four programmable beam frequencies that provide superior perimeter protection by eliminating crosstalk and interference when multiple units are used. False alarms caused by animals, falling leaves, poor weather, or other sources are minimized by programming the alarm output trigger operation.

ENFORCER Long-Range Barrier Sensors work in even the most extreme conditions. A built-in heater automatically turns on and off depending on the outside temperature. An environmental control system senses a slow degradation in beam strength when weather conditions worsen to help prevent false alarms.

Installation and alignment is quick and easy with the ENFORCER Long-Range Barrier Sensors. They come with swiveling heads that allow them to be mounted along the same wall or on opposite walls, as well as provide for easy alignment of the beams between the transmitter and receiver.

Features

  • For indoor or outdoor perimeter security
  • Long sensor range up to 190ft (60m) outdoors, 380ft (120m) indoors
  • Install on windows, doorways, skylights, fence tops, and any place where space is limited
  • End caps swivel so sensor can be mounted on a single wall or on opposite walls with no L-bracket needed
  • Programmable immediate trigger on simultaneous breaking of beams, or trigger after a single pair of beams is broken for at least 2 seconds
  • Heater for use in cold weather operation
  • Heater activates at 41ºF (5ºC)
  • Terminal block wiring
  • Slim design: 2-1/4" x 1-7/8" (55x49 mm)
  • Rugged aluminum construction
  • Built-in tamper switches, one on either end, trigger the alarm if end cap is removed
  • No synchronizing wires required to align the beams
  • Form C relay output
  • LED and buzzer alignment indicators
  • AGC (Auto Gain Control) circuits regulate beam signals in order to compensate for and ensure operation in rain, fog, and low-temperature conditions
  • Programmable for 4 different frequencies to reduce interference between multiple units

Đánh giá nhận xét

5
rate
0 Đánh giá
  • 5
    0 Đánh giá
  • 4
    0 Đánh giá
  • 3
    0 Đánh giá
  • 2
    0 Đánh giá
  • 1
    0 Đánh giá
Chọn đánh giá của bạn
Quá tuyệt vời
CAPTCHA code
Tổng Đài Hỗ Trợ 0904937368
Fanpage
Youtube
Danh Sách Ngân Hàng Thanh Toán Online

CÔNG TY TNHH TƯ VẤN PHÁT TRIỂN CÔNG NGHỆ CST VIỆT NAM

ADD : Số 14 Ngõ 138/245 Định Công – Phường Định Công - Quận Hoàng Mai - Hà Nội
Điện thoại: 024.85872879 - Fax: (+84.4) 35641453

Email: sales@cameraquansatcctv.com.vn

http://cameraquansatcctv.com.vn

HotLine : 024.85872879 / 0904937368


Chat hỗ trợ
Chat ngay
0904937368