Camera IP nhận diện biển số HIKVISION DS-2CD7A26G0/P-IZS (8-32mm)
- Camera nhận dạng biển số DeepinView.
- Nhận dạng biển số ô tô/ xe máy.
- Độ phân giải: 1920x1080 @ 60fps.
- Ống kính: 8~32mm.
- Độ nhạy sáng: 0.002 Lux @ F1.2, AGC ON.
- Chuẩn nén: H.265+, H.265, H.264+, H.264.
- Chống ngược sáng thực WDR 140dB.
- Hỗ trợ 5 luồng dữ liệu.
- Hỗ trợ khe cắm thẻ nhớ tối đa 256GB.
- Hỗ trợ 1 cổng báo động vào/ra.
- Tiêu chuẩn chống bụi nước: IP67.
- Tiêu chuẩn chống va đập: IK10.
- Tầm quan sát hồng ngoại: 100 mét.
- Phù hợp dùng cho cổng, lối ra vào.
Đặc tính kỹ thuật
| Camera |
| Image Sensor |
1/1.8 inch Progressive Scan CMOS |
| Signal System |
PAL/NTSC |
| Min. Illumination |
Color: 0.002 Lux @ (F1.2, AGC ON), 0 Lux with IR |
| Slow shutter |
Yes |
| Shutter time |
1 s to 1/100,000 s |
| Lens |
8 to 32 mm: horizontal FOV 42.5° to 13.4°, vertical FOV 23.4° to 7.7°, diagonal FOV 49° to 15.3° |
| Adjustment Range |
Bracket, pan: 0° to 355°, tilt: 0° to 90°, rotate: 0° to 360° |
| Day& Night |
IR Cut Filter |
| Wide Dynamic Range |
140dB |
|
Compression Standard
|
| Video Compression |
H.265+/H.265/H.264+/H.264/MJPEG |
| H.264 code profile |
Baseline Profile/Main Profile/High Profile |
| Video bit rate |
32Kbps~16Mbps |
|
Image
|
| Max. Image Resolution |
1920 x 1080 |
| Image Enhancement |
BLC, HLC, 3D DNR, Defog, EIS |
| BLC |
Support |
| HLC |
Support |
| Smart Defog |
Support |
| EIS |
Support |
| 3D DNR |
Support |
| Picture Overlay |
LOGO picture can be overlaid on video with 128 × 128 24bit bmp format |
| Day/Night Switch |
Day/Night/Auto/Schedule/Triggered by Alarm In/ Triggered by video |
|
Network
|
| Network Storage |
microSD/SDHC/SDXC card (128G), local storage and NAS (NFS,SMB/CIFS), ANR |
| Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour |
|
Intelligent
|
| Behavior analysis |
Line crossing detection, intrusion detection, region entrance detection, region exiting detection, unattended baggage detection, object removal detection |
|
Interface
|
| Communication Interface: |
1 RJ45 10M/100M/1000M Ethernet port
1 RS-485 interface (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive) |
| Alarm |
2 inputs, 2 outputs (up to 24VDC 1A or 110VAC 500mA) |
| Video Output |
1Vp-p Composite Output (75 Ω, BNC) |
| On-board storage |
Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
| Reset Button |
Yes |
|
Smart Feature-set
|
| Behavior Analysis |
Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal |
| Line Crossing Detection |
Cross a pre-defined virtual line |
| Intrusion Detection |
Enter and loiter in a pre-defined virtual region |
| Region Entrance |
Enter a pre-defined virtual region from the outside place |
| Region Exiting |
Exit from a pre-defined virtual region |
| Unattended Baggage |
Objects left over in the pre-defined region such as the baggage, purse, dangerous materials |
| Object Removal |
Objects removed from the pre-defined region, such as the exhibits on display |
| Exception Detections |
Scene change detection, defocus detection |
|
General
|
| IR Range |
up to 100m |
| Operation Condition |
-30°C to 60°C |
| Power Consumption |
12 VDC, 1.2 A, max. 14 W; PoE (802.3at, 42.5 V to 57 V), 0.4 A to 0.3 A |
| Impact Protection |
IK10 |
| Weather Proof |
IP67 |
| Dimensions |
Φ140 × 351 mm |
| Weight |
approx. 2.5 kg |
- Bảo hành: 24 tháng.
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
