Low Current Photoelectric Beam Sensor Outdoor TAKEX PB-IN-75SW
- Synchronized High Powered Beams
+ 100 times sensitivity margin and 10 times distance margin by using double modulation and Phase Locked Loop (PLL) circuit (patented).
+ External light compensation circuit provides excellent tolerance against sun light, automobile, flourescent and mercury lights.
+ Upper and Lower beams are 'and-gated', which helps to prevent false alarms from falling leaves and small animals.
- Four Frequencies Selection: 4 separate choices of frequency avoids cross-talk in stacked or long linear installations.
- Low Current Consumption
+ Low current consumption design for use with solar panels and low current output control panels.
+ Under 6mA when used DC6V. (approx. 3.7mA for transmitter only).
- Receiving Level Indication Function
+ Sensitivity attenuation LED Lights when beam is attenuated: Convenient for checking sensitivity margin after putting cover on.
+ Monitor jack output: Tester to measure receiving level is available on the market, therefore axis adjustment can be done correctly.
- Response Time: Response time can be field advised from 50ms-700ms.
- Protection Against Frost/Dew: Special front cover hood design prevents false alarms when the cover is coated with frost or dew.
- Environment Monitor: Annunciation by relay output of specific low signal level due to fog, rain or snow.
- Design Features
+ Extensive Beam alignment adjustment (Horizontal +/-90°, Vertical +/-10°).
+ Tamper output for high security.
+ Strong PC resin used for cover.
+ Automatic gain lock.
Thông số kỹ thuật
| Name |
Low current photoelectric beam sensor |
| Model |
PB-IN-75SW |
| Detection system |
Near infrared beam interruption system (TR,-RE, beams simultaneous interruption) |
| Infrared beam |
Double modulation pulsed beam by LED |
| Protection distance |
Outdoor 250ft (75m) or less |
| Max. arrival distance |
Tenfold 2500ft (750m) |
| Response time |
50m sec. to 700m sec. variable (standard 50m sec.) |
| Power supply |
5V to 8V DC or 10V to 30V DC (with-polarity) |
| Power consumption |
5V to 8V DC: 6mA(TR. side 3.7mA) or less when armed
10V to 30V DC: 25mA(TR. side 15mA) or less when armed |
| Alarm output |
Dry contact relay Form C
Action: Interruption time + off-delay 2 secs.
Contact capacity: 30V (AC/DC) 1A |
| Environment output |
Dry contact relay Form C
Action: an output when environment causes low signal level
Contact capacity: 30V (AC/DC) 0.5A |
| Tamper output |
Dry contact relay Form B
Action: trigger an output when cover is opened
Contact capacity: 30V (DC) 0.1A |
| Alarm LED |
Red LED (receiver) lights on when an alarm is initiated |
| Sensitivity attenuation LED |
Red LED (receiver) lights on when beam reception is attenuated |
| Operation LED |
Green LED (transmitter) lights on when cover is opened with power on |
| Additional functions |
Four frequencies selection
Environmental fade out monitor
Beam strength monitor output |
| Beam alignment adjustment |
Horizontal : +/-90°, Vertical : +/-10° |
| Ambient temperature range |
-13F to +140F (-25C to +60C) |
| Installation |
Outdoor |
| Wiring |
M3 self-up terminals |
| Weight |
Transmitter: 42oz (1200g)
Receiver: 45.5oz (1300g) |
| Appearance |
PC resin (wine red) |
- Xuất xứ: Nhật Bản.
- Bảo hành: 12 tháng.
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
