Photoelectric Beam Sensor TAKEX PXB-100SW
- Our ultra low-current PXB-100SW is designed to be powered by BA-6SLA solar panel and power units for wireless or remote applications without cabling infrastructure.
Features
- 4 x synchronised high power beams.
- Low-current consumption for battery or solar operation.
- 4 selectable beam channels to prevent crosstalk.
- Double modulation for unsurpassed light immunity.
- Increased beam separation minimises nuisance alarms.
- Vivid internal colour aids beam alignment procedure.
- Lightning and surge protection up to 15kV.
- Environmental monitoring circuit.
- Dynamic auto-gain lock (AGL).
- 50,000 lux sunlight immunity.
- IP65 housing.
- Optional BA-6SLA solar panel/battery pack available.
Specifications
| Model |
PXB-100SW |
| Product type |
Photoelectric Beam Sensor |
| Detection system |
Near infrared pulsed beam interruption system
(TX-RX 4 beam simultaneous interruption) |
| Infrared beam |
Double modulation pulsed beam by LED |
| Protection distance |
Outdoor 100m (330ft) or less
Indoor 200m (660ft) or less |
| Max. beam range |
Outdoor 1000m (3300ft) or less
Indoor 1000m (3300ft) or less |
| Response time |
0.05 sec. to 0.7 sec. (Variable at pot) |
| Power supply |
5 to 30VDC (polarity) |
| Current consumption |
5 to 8VDC
- Transmitter:
+ Max: 3.7mA
+ Max 8.2mA
- Receiver:
+ Max: 2.3mA
+ Max 10mA
10 to 30VDC
- Transmitter:
+ Max: 5.2mA
+ Max 9.4mA
- Receiver:
+ Max: 3.1mA
+ Max 10.7mA |
| Alarm output |
- Dry contact relay output form N.O./N.C switchable
- Contact action : Interruption time (min. 2 sec)
- Contact capacity : 30V (AC/DC) 1A (resistive load) Protective resistor |
| Environmental output |
- Dry contact relay output form N.O./N.C. switchable
- Action: activated when weather condition worsens
- Capacity: 30V (AC/DC) 1A (resistive load) Protective resistor |
| Tamper output |
- Dry contact relay (N.C.)
- Action: activated when cover is detached
- Capacity: 30V (AC/DC) 0.1A (resistive load) Protective resistor |
| Alarm LED |
Red LED (Receiver) ON: when an alarm is initiated |
| Attenuation LED |
Red LED (Receiver) ON: when beam is attenuated |
| Ambient temperature range |
-35°C to +66°C (-31°F to +151°F) |
| Beam Adjustment |
Horizontal : ±90° / Vertical : ±20° |
| Functions |
- Modulated beam frequency selection
- Tone indicator
- Environmental module
- Beam power selection
- Transmitting power adjustment
- Alarm output selection
- Environmental output selection
- Monitor jack
- Tamper
- Response time adjustment
- Upper / Lower beam switch
- Wireless Checker |
| Mounting positions |
Outdoor, Indoor |
| IP rating |
IP65 |
| Wiring |
Terminals |
| Weight |
Transmitter: 1500g (52.5oz)
Receiver: 1550g (54.3oz) |
| Appearance |
PC resin (wine red) |
- Bảo hành: 12 tháng.
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
