Photoelectric Beam Sensor TAKEX PXB-200F
- Đầu báo hồng ngoại 4 tia sử dụng kết nối hồng ngoại giữa 2 bộ thu phát được đồng bộ và mã hóa (điều chế) kép đảm bảo hoạt động ổn định trong các điều kiện thời tiết khắc nghiệt nhất kể cả mưa lớn, sương mù, nhiễu ngoài.
- Khoảng cách bảo vệ: 200m.
- Chống sét đến 15.000 VDC.
Thông số kỹ thuật
| Model |
PXB-200F |
| Detection system |
Near infrared pulsed beam interruption system
(TR-RE 4 beam simultaneous interruption) |
| Infrared beam |
Double modulation pulsed beam by LED |
| Protection distance |
Outdoor 660' (200 m) or less |
| Max. arrival distance |
6600' (2000 m) |
| Response time |
0.05 sec. to 0.7 sec. (Variable at pot) |
| Power supply |
12 to 30V DC (Non-polarity) |
| Current consumption |
32 mA or less |
| Alarm output |
Dry contact relay output form C
Contact action: Interruption time (Min.2sec.)
Contact capacity: 30V (AC/DC) 0.25A (resistive load)
Protective resistor |
| Environmental output |
Dry contact relay output form C
Action : Activated when weather condition gets worse
Contact capacity : 30V (AC/DC) 0.25A (resistive load)
Protective resistor |
| Tamper output |
Dry contact relay (N.C.)
Action: Activated when cover is detached
Contact capacity: 30V (AC/DC) 0.1A (resistive load)
Protective resistor |
| Alarm LED |
Red LED (Receiver) ON: when an alarm is initiated |
| Attenuation LED |
Red LED (Receiver) ON: when beam is attenuated |
| Ambient temperature range |
–31°F to +151°F (–35°C to +66°C) |
| Beam adjustment |
Horizontal: ±90° Vertical: ±20° |
| Functions |
Tone indicator, Environmental module, Monitor jack, Tamper
Response time adjustment, Upper/Lower beam switch, Wireless checker
Automatic gain control |
| Mounting positions |
Outdoor, Indoor |
| IP rating |
65 |
| Wiring |
Terminals |
| Weight |
Transmitter : 52.5oz (1500g)
Receiver : 54.3oz (1550g) |
| Appearance |
Resin (wine red) |
- Bảo hành: 12 tháng.
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
