24-Port Gigabit Smart PoE Switch HIKVISION DS-3E1526P-SI
- 24 × gigabit PoE ports, and 2 × gigabit fiber optical ports.
- IEEE 802.3at/af standard for PoE ports.
- Network topology management, alarm push, network health monitor.
- 6 KV surge protection for PoE ports.
- AF/AT camera can reach up to 300 m in extend mode.
- PoE watchdog to auto detect and restart the cameras that do not respond.
- Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.
Specification
| Model |
DS-3E1326P-SI |
| Network Parameters |
| Port Number |
24 × 100 Mbps PoE RJ45 port, and 2 × gigabit combo |
| Port Type |
RJ45 port, full duplex, MDI/MDI-X adaptive |
| Standard |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z |
| High Priority Ports |
Ports 1 to 8 |
| Forwarding Mode |
Store-and-forward switching |
| Working Mode |
Standard mode (default)
Extend mode |
| MAC Address Table |
16K |
| Switching Capacity |
8.8 Gbps |
| Packet Forwarding Rate |
6.5472 Mpps |
| Internal Cache |
4 Mbits |
| PoE Power Supply |
| PoE Standard |
IEEE 802.3af, IEEE 802.3at |
| PoE Power Pin |
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| PoE Port |
Ports 1 to 24 |
| Max. Port Power |
30 W |
| PoE Power Budget |
370 W |
| Software Function |
| Device Maintenance |
Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync |
| Port Configuration |
Port rate configuration, slow control, and ports enabling |
| Long Range |
Up to 300 m transmission |
| PoE Configuration |
PoE watchdog: Ports 1 to 24 auto detect and restart the cameras that do not respond
PoE enabling: Support |
| Port Rate-Limiting |
Rate-limiting for ingress and egress ports |
| Storm Control |
Storm control of unknown unicast, multicast and broadcast |
| Port Mirroring |
Support |
| Link Aggregation |
Static link aggregation supported for G1 and G2 port |
| Port Isolation |
Ports in isolation group cannot communicate with each other |
| QoS |
WRR and SP scheduling and port priority |
| VLAN |
4094 VLANs |
| STP |
STP and RSTP protocols |
| SNMP |
SNMPv1 and SNMPv2c supported for obtaining node information of the system and interfaces |
| LLDP |
LLDP protocol supported for port configuration, global configuration and neighbour discovery |
| General |
| Power Supply |
100VAC~240 VAC, 50/60 Hz, Max. 6.5 A |
| Max. Power Consumption |
400W |
| Power Consumption in Idle |
5W |
| Approval |
| EMC |
FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN
IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN
50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003:
Issue 6); RCM (AS/NZS CISPR 32: 2015) |
| Safety |
UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017) |
| Chemistry |
CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006) |
- Bảo hành: 24 tháng.
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
