| Model |
RG-AP630(IODA) |
| Target Deployments |
For big campus, wireless city, harbour, storage room, mine |
| Basic Specifications |
Radio |
Concurrent dual-radio dual-band |
| Protocol |
802.11a/b/g/n/ac |
| Antenna |
Built-in Omnidirectional Smart Antenna (support external/internal antenna switching) |
| Antenna Gain |
4dBi |
| Max Throughput |
450Mbps@2.4GHz
1.3Gbps@5GHz
1.75Gbps per AP |
| Special Streams |
3 |
| Maximum Transmit Power |
27dBm |
| Adjustable Power |
1dBm |
| IP Rating |
IP67 |
| Ports |
Service Port |
1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector)
1 SFP port (combo with ETH1) |
| Management Port |
1 Console Port (RJ45) |
| Power |
Power Supply |
PoE+ (802.3at) |
| Power Consumption |
<25W |
| WLAN |
Maximum clients per AP |
Up to 256 |
| SSID capacity |
Up to 16 per radio
Up to 32 per AP |
| SSID hiding |
Support |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID |
Support |
| Remote Intelligent Perception Technology (RIPT) |
Support |
| X-speed |
Support |
| Intelligent load balancing based on the number of users or traffic |
Support |
| STA control |
SSID/radio-based |
| Bandwidth control |
STA/SSID/AP-based speed control |
| Preference for 5GHz (band select) |
Support |
| Wireless position tracking |
Support |
| Dynamic Frequency Selection (DFS) |
Future Release Support |
| Security |
PSK, Web, and 802.1x authentication |
Support |
| Data encryption |
WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| QR code authentication |
Support |
| SMS authentication |
Support |
| PEAP authentication |
Support |
| Data frame filtering |
Whitelist, static/dynamic blacklist |
| User isolation |
Support |
| Rogue AP detection and countermeasure |
Support |
| Dynamic ACL assignment |
Support |
| WAPI |
Support |
| RADIUS |
Support |
| CPU Protection Policy (CPP) |
Support |
| Network Foundation Protection Policy (NFPP) |
Support |
| Wireless Intrusion Detection System(WIDS) |
Support |
| Wireless Intrusion Prevention System (WIPS) |
Support |
| Routing |
IPv4 address |
Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel |
Support |
| ICMPv6 |
Support |
| IPv6 address |
Manual or automatic configuration |
| Multicast |
Support |
| Management and Maintenance |
Network management |
SNMP v1/v2C/v3, Telnet, SSH, TFTP, and web management |
| Visualized wireless heat map analysis |
Support (need to integrate with SNC) |
| Real-time spectrum analysis |
Support (need to integrate with SNC) |
| Fault detection and alarm |
Support |
| Cloud AC management |
Support |
| Statistics and logs |
Support |
| FAT/FIT switching |
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC.
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| External Characteristics |
Lock |
Support |
| LED Indicators |
Power status and WDS signal strength |
| Relevant Standard |
Wi-Fi Alliance Certification |
Support |
| Safety Standard |
GB4943, EN/IEC 60950-1, EN/IEC 60950-22 |
| EMC Standard |
GB9254-2008, EN301 489, EN55022 |
| Health Standard |
EN 50385 |
| Radio Standard |
FCC Part15,EN300328, EN301893 |
| Vibration Standard |
GB/T 2423 |
| Specifications |
Dimensions (W x D x H) |
276 × 246 × 90 (mm) |
| Weight |
<2.5kg |
| Work Environment |
Temperature |
Operating Temperature: -40°C to 55°C
Storage Temperature: -40°C to 70°C |
| Humidity |
Operating Humidity: 0% to 95% (non-condensing)
Storage Humidity: 0% to 95% (non-condensing) |
| Installation Mode |
Wall/pole-mount installation |
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
