| Description |
Cisco Catalyst 9115AX Access Point, External Antennas; Wi-Fi 6; 4x4:4 MIMO, S Domain |
| Software |
Cisco Unified Wireless Network Software Release 8.9 or later
Cisco IOS ® XE Software Release 16.11 or later |
| Supported wireless LAN controllers |
Cisco Catalyst 9800 Series Wireless Controllers
Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities |
4x4 MIMO with four spatial streams
Maximal Ratio Combining (MRC)
802.11n and 802.11a/g beamforming
20- and 40-MHz channels
PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
802.11 Dynamic Frequency Selection (DFS)
Cyclic Shift Diversity (CSD) support |
| 802.11ac |
4x4 downlink MU-MIMO with four spatial streams
MRC
802.11ac beamforming
20-, 40-, 80-, and 160-MHz channels
PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
802.11 DFS
CSD support |
| 802.11ax |
4x4 downlink MU-MIMO with four spatial streams
Uplink/downlink OFDMA
TWT
BSS coloring
MRC
802.11ax beamforming
20-, 40-, 80-, and 160-MHz channels
PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
802.11 DFS
CSD support |
| Integrated antenna |
2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth
5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| Interfaces |
1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
Management console port (RJ-45)
USB 2.0 (enabled via future software) |
| Indicators |
Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) |
Access point (without mounting brackets): 20.3 x 20.3 x 4.3 cm |
| Input power requirements |
802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
Cisco power injector, AIR-PWRINJ6=
802.3af PoE
Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
| Environmental |
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: -4° to 122°F (-20° to 50°C)
Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft. |
| System memory |
2048 MB DRAM
1024 MB flash |
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
