| Model |
RG-AP820-L(V2) |
| Hardware |
| Radio |
Dual-radio dual-band
Radio 1: 2.4G 11ax/5G 11ax: 2×2 MIMO
Radio 2: 5G 11ax: 2x2 MIMO |
| Protocol |
Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac |
| Operating Bands |
802.11b/g/n/ax:2.4G ~ 2.483GHz
802.11a/n/ac/ax: 5.150~5.350GHz, 5.47~5.725GHz, 5.725~5.850GHz (vary depending on different countries) |
| Spatial Streams |
Up to 4: 2×2:2 in 2.4GHz , 2×2:2 in 5GHz |
| Max Throughput |
Maximum throughput (5G+5G mode) per AP: 2.4Gbps
Radio1：5G low band 1.2Gbps
Radio2：5G high band 1.2Gbps
2.4G+5G operation mode, maximum throughput per AP: 1.775Gbps
Radio1：2.4G 0.574Gbps
Radio2：5G 1.2Gbps |
| Modulation |
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps，DQPSK@2Mbps，and CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM
OFDMA (up to 1024-QAM) |
| Antenna |
Integrated antenna design |
| Antenna Gain |
2.4G: 3dBi
5G: 3dBi |
| Service Ports |
1 10/100/1000M Ethernet ports, PoE In |
| Management Port |
1 console port |
| Reset Button |
Support |
| Anti-theft Lock |
Support |
| LED Indicator |
1 LED indicator (Support red, green, blue, orange and flashing mode, which indicates device access) |
| Transmit Power |
≤100mw (20dBm) (vary depending on different countries) |
| Adjustable Power |
1dBm |
| Power Supply |
Local power supply (DC 48V/1A) (Power adapters are sold separately)
PoE (802.3af) – full spectrum operation |
| Power Consumption |
<12.95W |
| Physical |
| Temperature |
Operating Temperature: -10°C to 50°C
Storage Temperature: -40°C to 70°C |
| Humidity |
Operating Humidity: 5% to 95% (non-condensing)
Storage Humidity: 5% to 95% (non-condensing) |
| Installation Mode |
Ceiling/wall-mountable |
| Dimensions (W x D x H) |
153 x 193 x 26 mm (Height of the AP only, excluding the mount kit) |
| Weight |
≤0.5kg (include mount kit) |
| IP Rating |
IP41 |
| MTBF |
250,000 hours |
| Safety Standard |
GB4943, EN/IEC 62368-1 |
| EMC Standard |
GB9254, EN301 489 |
| Radio Standard |
SRRC, EN300 328, EN301 893 |
| Software |
| WLAN |
Maximum clients per AP |
1024 |
| BSSID capacity |
Up to 32 |
| SSID hiding |
Support |
| 5G Priority (Band Steering) |
Support |
| Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID |
Support |
| Remote Intelligent Perception Technology (RIPT) |
Support |
| Intelligent device recognition technology |
Support |
| Intelligent load balancing based on the number of users or traffic |
Support |
| STA control |
SSID/radio-based |
| Bandwidth control |
STA/SSID/AP-based bandwidth control |
| Data encryption |
WPA（TKIP), WPA-PSK, WPA2 (AES), WPA3, WEP (64/128 bits） |
| PSK and web authentication |
Support |
| PPSK authentication (For Employee) |
Support (require wireless controller) |
| 802.1x authentication |
Support |
| PEAP authentication |
Support |
| Data frame filtering |
Whitelist, static/dynamic blacklist |
| User isolation |
Support |
| Rogue AP detection and countermeasure |
Support |
| Dynamic ACL assignment |
Support |
| RADIUS |
Support |
| CPU Protection Policy (CPP) |
Support |
| Network Foundation Protection Policy (NFPP) |
Support |
| IP |
IPv4 and IPv6 address |
Support |
| Multicast routing |
Multicast to unicast conversion |
| DHCP service |
DHCP Snooping, Option 82, Server, Client |
| Management and Maintenance |
Supported wireless LAN controllers |
Ruijie WS Series Wireless Controller |
| Ruijie MACC-Base Software Controller |
| Ruijie Cloud (Public Cloud) |
| Management protocol |
Telnet, SSH, TFTP, Web |
| Wireless Intelligent AI Optimization Service (WIS) |
Support |
| SNMP |
SNMPV1,V2c,V3 |
| LLDP |
LLDP, LLDP-MED, LLDP-POE |
| Syslog / Debug |
Support |
| FAT/FIT/MACC mode switching |
Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |
0904937368 Sale- 1 HỖ TRỢ KỸ THUẬT
