Tìm kiếm sản phẩm: Tìm nâng cao

Danh mục sản phẩm

Đăng ký | Quên mật khẩu

Tin mới đăng

Hỗ trợ trực tuyến

Phí vận chuyển Tỷ giá
 
Hãng vận chuyển
Nặng khoảng
gram
Khoảng cách
Từ
Đến
Nhập vào đầy đủ các thông tin yêu cầu và bấm vào "Tính phí" để xem giá thành vận chuyển
Giá:
0

Thống kê truy cập

Số lượt truy cập: 5.530.744
Số người đang xem:  188
BÀN PHÍM ĐIỀU KHIỂN VÀ GIÁM SÁT BOSCH FMR‑7033 LCD Keypad
BÀN PHÍM ĐIỀU KHIỂN VÀ GIÁM SÁT BOSCH FMR‑7033 LCD Keypad

BÀN PHÍM ĐIỀU KHIỂN VÀ GIÁM SÁT BOSCH FMR‑7033 LCD Keypad

Cập nhật cuối lúc 20:24 ngày 19/10/2022, Đã xem 263 lần
Có 0 người đã bình chọn
  Đơn giá bán: Liên hệ
  VAT: Đã bao gồm VAT
  Model: FMR‑7033 LCD Keypad
  Hãng SX: Bocsh
  Tình trạng: Còn hàng   Bảo hành: 12 Tháng

Đặt mua sản phẩm

Công Ty TNHH Tư Vấn  Phát Triển Công Nghệ CST Việt Nam
Công Ty TNHH Tư Vấn Phát Triển Công Nghệ CST Việt Nam
Số 14 Ngõ 138/245 Định Công – Phường Định Công , Hoàng Mai, Hà Nội
Hotline : 024.85872879 / 0904 937 368
sales@cameraquansatcctv.com.vn
| Chia sẻ |
CHI TIẾT SẢN PHẨM

BÀN PHÍM ĐIỀU KHIỂN VÀ GIÁM SÁT BOSCH FMR‑7033 LCD Keypad

-       Bàn phím FMR-7033 với màn hình LCD hiển thị 02 dòng x 32 ký tự, có chức năng điều khiển và thông báo từ xa dùng cho hệ thống báo cháy FPD-7024. Chức năng của FMR-7033 tương tự như chức năng của Bảng điều khiển trên bộ báo cháy trung tâm FPD-7024. Có thể kết nối đến 04 bàn phím FMR-7033 với bộ báo cháy trung tâm FPD-7024.

-       FMR-7033 thực hiện các chức năng như: Kiểm tra hệ thống nội bộ, lập trình hệ thống, điều khiển hệ thống, xem các tường thuật của hệ thống…

-       Chức năng bảo vệ bằng mã số truy cập.

-       Compatible with the FPD‑7024 FACP

-       Two‑line, 32‑character, alphanumeric LCD display

-       Status LEDs identify alarm, trouble, supervisory, and silenced conditions

-       Address setting by jumper

-       Remotely control system commands and programming

-       Passcode protection controls system access

-       Low profile design.

The FMR‑7033 LCD Keypad combines remote annunciator and controller functions for fire alarm systems controlled by the FPD‑7024 Fire Alarm Control Panel (FACP). It operates identically to the user interface on the FPD‑7024 FACP. You can connect up to four FMR‑7033 keypads to an FPD‑7024.

The FMR‑7033 allows remotely starting local system tests, system programming, system control, and viewing the system's event log. Passcode protect access to system functions allowing installation in areas open to the general public.

The two‑line, 32‑character LCD (liquid‑crystal display) annunciates system status and events. The top line provides general system status information, while the bottom line identifies specific devices or instructions. An internal sounder signals alarm, supervisory, and trouble conditions and annunciates keystrokes during programming and control procedures. Four status LEDs indicate supervisory, alarm, trouble, and silenced conditions. A pull‑out slide with operating instructions

fits behind the mounting base.

 

Specifications

Dimensions (HxWxD)

4.6 in. x 6.3 in. x 1.2 in. (12 cm x 16 cm x 3 cm)

Environment

Indoor, dry

Relative Humidity

Up to 95%, non‑condensing

Temperature (Operating)

+32°F to +122°F (0°C to +50°C)

Current (alarm):

100 mA

Current (standby)

80 mA

Voltage (operating)

12 VDC nominal

-       Bảo hành: 12 tháng.

NHẬN XÉT SẢN PHẨM
Chưa có nhận xét gì về sản phẩm
VIẾT NHẬN XÉT
Hãy đăng nhập để viết nhận xét cho sản phẩm