HP 2910-24G al Switch J9145A
- Fixed Port Layer-3 Managed Ethernet Switch.
- 20 autosensing 10/100/1000 port, 4 dual-personality ports SFP
- High-performance Gigabit Ethernet access switch
- Four optional 10 GbE (CX4 and/or SFP+) ports
- IEEE 802.3af/802.3at functionality ( PoE/PoE+)
- Layer 2 and Layer 3 plus static IP and RIP routing
Features
Quality of Service (QoS)
- Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
- Rate limiting: per-port ingress enforced maximums
Connectivity
- 10 Gbps Ethernet connectivity: up to four optional and flexible 10-Gigabit ports (CX4 and/or SFP+), with optional interconnect kit for short-distance connectivity
- IPv6: IPv6 host: allows the switches to be managed and deployed at the edge of IPv6 networks . Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
- IEEE 802.3at Power Over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
- Pre-standard PoE support: detects and provides power to pre-standard PoE devices
Performance
- High-performance architecture: 128 Gbps switching fabric with up to 95 Mpps (24-port switches) and 176 Gbps switching fabric with up to 131 Mpps (48-port switches)
- Selectable queue configurations: allow you to increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications
Resiliency and high availability
- IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
- IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports) per trunk.
Specifications
HP 2910-24G al Switch (J9145A)
|
Ports
|
20 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
|
4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers)
|
1 RJ-45 serial console port
|
Supports a maximum of 4 10GbE ports, with optional module
|
Physical characteristics
|
Dimensions
|
17.4(w) x 14.4(d) x 1.73(h) in (44.2 x 36.58 x 4.4 cm) (1U height)
|
Weight
|
10.92 lb (4.95 kg)
|
Memory and processor
|
Processor
|
Dual ARM1156T2S @ 515 MHz, 4 MB flash, 1 GB compact flash, 512 MB
|
SDRAM; packet buffer size: 6 MB
|
Mounting
|
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
|
Performance
|
1000 Mb Latency
|
< 2.9 µs (FIFO 64-byte packets)
|
10 Gbps Latency
|
< 1.3 µs (FIFO 64-byte packets)
|
Throughput
|
up to 95 million pps (64-byte packets)
|
Switching capacity
|
128 Gbps
|
Routing table size
|
2000 entries (IPv4)
|
MAC address table size
|
16000 entries
|
Environment
|
Operating temperature
|
32°F to 131°F (0°C to 55°C)
|
Operating relative humidity
|
15% to 95% @ 104°F (40°C), noncondensing
|
Non-operating/
|
-40°F to 158°F (-40°C to 70°C)
|
Storage temperature
|
Non-operating/
|
15% to 95% @ 149°F (65°C), noncondensing
|
Storage relative humidity
|
Altitude
|
up to 10,000 ft (3 km)
|
Acoustic
|
Power: 53.5 dB, Pressure: 39.4 dB; DIN 45635T.19 per ISO 7779
|
Electrical characteristics
|
Description
|
The switch automatically adjusts to any voltage between 100-127 and 200- 240 volts and either 50 or 60 Hz
|
Maximum heat dissipation
|
279 BTU/hr (295 kJ/hr)
|
Voltage
|
100-127/200-240 VAC
|
Current
|
1.7/0.9 A
|
Idle power
|
49 W
|
Maximum power rating
|
82 W
|
Frequency
|
50/60 Hz
|
Notes
|
Idle power is the actual power consumption of the device with no ports connected.
|
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
|
Safety
|
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
|
Emissions
|
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
|
Immunity
|
EN
|
EN 55024, CISPR 24
|
ESD
|
IEC 61000-4-2; 4 kV CD, 8 kV AD
|
Radiated
|
IEC 61000-4-3; 3 V/m
|
EFT/Burst
|
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
|
Surge
|
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
|
Conducted
|
IEC 61000-4-6; 3 V
|
Power frequency magnetic field
|
IEC 61000-4-8; 1 A/m
|
Voltage dips and interruptions
|
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
|
Harmonics
|
IEC 61000-3-2
|
Flicker
|
IEC 61000-3-3
|
Management
|
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS-232C)
|
Notes
|
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.
|