Patch cord Dintek Cat.6A 10GB UTP (Part number: 1201-060xx, dài: 0.5m, 1.0m, 2.0m, 3.0m)

Patch cord Dintek Cat.6A 10GB UTP (0.5m, 1.0m, 2.0m, 3.0m)

-Part number: 1201-060xx

-Patch cord UTP và FTP Cat.6 10GB, 2 đầu đúc RJ45, màu xám (Gray).

-Cat.6A 4 Pair F/UTP Patch Cord PVC.

-DINTEK Power MAX+™ Foil Wrapped UTP Patch Cords, are key components of the Power MAX+™ F/UTP end-to-end solution.

-DINTEK Power MAX+™ F/UTP Patch Cords are specifically designed to support high speed data networks for 10-Gigabit Ethernet  applications, and are fully tested to meet ANSI/TIA-568-C.2 Category 6A channel requirements. The patch cables are made from high quality shielded four pair 26AWG stranded wire. 

-DINTEK Power MAX+™ patch cords are pre-terminated with RJ45 shielded plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of Power MAX+™ Shielded products be used in a end-to-end system to maximize cabling performance.

-26AWG stranded wire provides maximum flexibility.

-Brilliant colors make management a snap.

-Fully tested to meet ANSI/TIA-568-C.2 category 6A channel requirement.

-The various colors are available to meet TIA/EIA-606 standards.

-The mechanical characteristics and transmission performance meet 16Mbps Token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet, 1.2Gbps ATM and 10G Ethernet requirements.

Features

-Molded boots prevent pin from bending and cables from kinking.

-Stranded wire provides maximum flexibility.

-Fully tested to meet ANSI/TIA-568-C.2 category 6A requirement.

-The mechanical characteristics and transmission performance meet 10GbaseT Ethernet, 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM, Gigabit-Ethernet and 1.2Gbps ATM requirements.

Applications

-10GBASE-T Ethernet.

-100BASE-TX Fast Ethernet.

-1000BASE-TX Gigabit Ethernet.

-1000BASE-T Gigabit Ethernet.

-10BASE-TX Ethernet.

-ATM CB1G.

-155/622 Mbps ATM.

-100 Mbps TP-PMD.

-100 VG-Any LAN.

-4/16 Mbps Token Ring.

-Voice.

Standards

-UL Listed.

-Meet Cat.6A channel performance requirements in ANSI/TIA-568-C.2.

-CENELEC EN 50173-1, CENELEC EN 50288-10-1 for horizontal cable.

-ISO/IEC 2nd Edition 11801 Class EA.

-Sản xuất tại Taiwan.